Connecting To A Wireless Network - TrekStor SurfTab xiron 10.1. Operating Instructions Manual

Table of Contents

Advertisement

Select applications in the multi-window mode (move and resize)
a)
Simultaneously tap with one finger on the application and with another
on the screen outside of the application.
b) Tighten the two fingers towards each other. The application is
highlighted in grey and selected now.
c)
Now you can move the application to any other position on the screen
or change the size of its display.
Zoom in and out by pinching your fingers together and apart on the application.
i
While an application is selected, it cannot be operated. You must first clear
i
the selection.
Clear the selection and operate the application.
a)
Simultaneously tap with one finger on the application and with another
on the screen outside of the application.
b) Pinch your fingers apart. The grey mark disappears and the application
is no longer selected.
c)
You can now operate the application as usual.

14) Connecting to a Wireless Network

With the SurfTab you have the possibility to access the Internet via Wi-Fi. If you
want to establish a connection to a new network, please proceed as follows:
a)
Go to the application menu to "S
you will find the option "w
b) Tap "w
-f
". The menu option now appears backed with colour.
i
i
c)
Tap the on/off-switch for Wi-Fi at the right part of the colour highlighted
option from "O
d) The Wi-Fi function becomes activated and all available wireless
networks are shown in the right menu column.
e) Tap the network with which you wish to be connected. An entry
window appears. Enter the network password of the network
selected and tap "c
f )
The SurfTab now connects to the wireless network and beyond that
with the internet. Via a browser you can surf the internet as usual.
If you have once established a connection to a Wi-Fi network, the SurfTab
i
automatically connects to it as soon as it is within reach. You do not
have to re-enter the Password.
To save power, it is advisable to turn off the wireless function, if you do not need it.
i
-f
".
i
i
" to "O
".
ff
n
".
Onnect
". In the left menu column,
ettingS
EN
11

Advertisement

Table of Contents
loading

Table of Contents