Preparing The Media - Panasonic SC-AKX58 Operating Instructions Manual

Preparing the media

Disc
1
Press [CD].
2
Press [x OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
3
Press [x OPEN/CLOSE] again to close the disc
tray.
USB
Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
–SUPER WOOFER
USB REC
A
PLAY
B
REC / PLAY
1
Decrease the volume and connect the USB device
to the USB port.
Hold the main unit when connecting or disconnecting
the USB device.
2
Press [USB] to select "USB A" or "USB B".
USB status indicator lights up in red when selected.
Note:
Do not use a USB extension cable. The system cannot
recognise USB device connected through a cable.
®
Bluetooth
You can connect and play an audio device wirelessly
through Bluetooth ®
Preparation
• Switch on the Bluetooth
the device near the system.
• Read the operating instructions of the device for
details.
10
D.BASS
/
USB device
(not supplied)
.
feature of the device and put
®
█
Pairing a device
Preparation
If this system is connected to a Bluetooth
disconnect it (Z"Disconnecting a device").
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select "BLUETOOTH".
If "PAIRING" is shown, continue with step 4.
2
Press [PLAY MENU] to select "PAIRING".
Or press and hold [ /MEMORY, –PAIRING] on the main
unit until "PAIRING" is shown. Continue with step 4.
3
Press [Y, U] to select "OK? YES" and then press [OK].
4
Select "SC-AKX58" or "SC-AKX38" from the
Bluetooth ® menu of the device.
If prompted for a passkey, input "0000".
The device connects with this system automatically
after pairing is complete.
The name of the connected device is shown for a few
seconds.
Note:
You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has not been used for the longest
time will be replaced.
█
Connecting a device
Preparation
If this system is connected to a Bluetooth
disconnect it (Z"Disconnecting a device").
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select "BLUETOOTH".
"BLUETOOTH READY" is shown.
2
Select "SC-AKX58" or "SC-AKX38" from the
Bluetooth menu of the device.
®
The name of the connected device is shown for a few
seconds.
3
Start playback on the device.
Note:
• A device must be paired to connect.
• The system can only connect to one device at a time.
• When "BLUETOOTH" is selected as the source, this
system will automatically try to connect to the last
connected device.
█
Disconnecting a device
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select "BLUETOOTH".
2
Press [PLAY MENU] to select "DISCONNECT?".
3
Press [Y, U] to select "OK? YES" and then press [OK].
"BLUETOOTH READY" is shown.
To cancel, select "OK? NO".
Using the main unit
Press and hold [ /MEMORY, –PAIRING] until
"PAIRING" is shown.
Note:
A device is disconnected when you:
• Select a different source.
• Move the device out of the maximum range.
• Disable the Bluetooth ® transmission of the device.
• Switch off the system or the device.
® device,
® device,