External Equipment; Others - Panasonic SC-AKX58 Operating Instructions Manual

External equipment

Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Using the auxiliary input
You can connect a VCR, DVD player etc. and listen to the
audio through this system.
Rear panel of this main unit
Audio cable
(not supplied)
Rear panel of
this main unit
1
Connect the external equipment.
2
Press [RADIO/EXT-IN] to select "AUX 1".
3
Play the external equipment.
Note:
• If you want to connect equipment other than those
described, refer to the audio dealer.
• Sound distortion can occur when you use an adaptor.
Connect to a portable audio equipment
You can play music from a portable audio equipment.
Preparation
• Switch off the equaliser (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
DVD player
(not supplied)
Audio cable
(not supplied)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm stereo (not supplied)
2
Press [RADIO/EXT-IN] to select "AUX 2".
3
Play the portable audio equipment.

Others

Bluetooth
This function automatically switches on the system when
you establish a Bluetooth
device.
1
Press [ , MEMORY] (main unit:
[ /MEMORY, –PAIRING]) to select "BLUETOOTH".
2
Press [PLAY MENU] to select "STANDBY MODE".
3
Press [Y, U] to select "ON STANDBY MODE" and
then press [OK].
To cancel, select "OFF STANDBY MODE".
TUNE MODE RADIO/
EXT-IN
OPEN/CLOSE
AUX IN 2
®
standby
connection from a paired
®
Portable audio
equipment
(not supplied)
19