Clock Reception; Clock / Calendar; Alarm - Oregon Scientific WMS801 User Manual

CLOCK RECEPTION

This product is designed to synchronize its calendar
clock automatically when it receives the MSN Direct
service.
Reception signal status:
TIME IS
SYNCHRONIZED
For best reception, the clock and antenna should be
placed on a flat, non-metallic surface near a window in
an upper floor of your home. The antenna should be
placed away from electrical appliances and not be
moved around when searching for a signal.
To enable / disable the clock radio reception
(clock synchronization):
1. Navigate to the Clock / Calendar / Alarm Area.
will show next to the Area.
2. Press and hold UP / DOWN.

CLOCK / CALENDAR

To switch between clock displays:
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press MODE to toggle between;
• Clock with seconds
• Clock with day
TIME IS NOT
SYNCHRONIZED
• Calendar
To manually set the clock:
(You only need to set the clock and calendar if you
have disabled the clock radio reception.)
Press SELECT to navigate to the Clock Area.
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press and hold MODE for 2 seconds. The setting
will blink.
3. Use UP / DOWN to change the setting.
4. Press CLOCK to confirm.
5. Repeat steps 3 and 4 to set the time zone
offset hour (+ / -23 hours), 12 / 24 hour format,
hour, minute, year, date / month format, month
and day.
NOTE If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.

ALARM

The clock has 2 alarms that can be set to sound with a
beep or melody alarm (5 melodies available).
To set an alarm:
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press ALARM to toggle between the alarm
displays and select either alarm 1 or 2, for setting.
3. Press and hold ALARM to enter alarm setting
mode. The alarm setting will blink.
8