Options Related To: Customizing Wireless Data Throughput - Motorola WR850GP User Manual

Section 3
Field
802.11g
Protection Mode:
(ADVANCED)

Options related to: CUSTOMIZING WIRELESS DATA THROUGHPUT

Field
Rate:
(ADVANCED)
Basic Rate Set:
(ADVANCED)
3-48
When 802.11g and 802.11b devices are used together, the
wireless performance of 802.11g devices is typically reduced, as
part of enabling the system to be backward compatible.
The WR850 is equipped to be able to minimize this performance
impact on 802.11g devices in a "mixed" environment.
• Selecting Auto enables this feature.
• Selecting Off disables this feature.
NOTE: Selecting Auto is recommended if Wireless Mode (above) is
set to either Compatibility or LRS.
Auto
FACTORY DEFAULT:
Sets a specific value for the wireless data rate, if desired.
You can select a specific data rate from those in the pull-down
list, to force connections to be made only when a certain level of
performance can be guaranteed.
NOTE: If you are using 802.11b clients, you should not select a Rate
greater than 11 Mbps, since this is the maximum data rate for
802.11b clients.
Your WR850 can automatically adjust the wireless data rate
when communicating with clients, in order to maximize the data
rate under varying conditions (range, interference, etc.). Select
Auto to enable this feature.
Auto
FACTORY DEFAULT:
Sets how the WR850 advise wireless clients of the data rate at
which to communicate.
• Select Default for compatibility with both 802.11g and
802.11b clients.
• Select All for compatibility with all wireless clients.
• Select 1 & 2 Mbps to communicate at minimum rates.
Default
FACTORY DEFAULT:
Description
Description
Configuration
WR850