Bajaj CT-100 User Manual page 7

Location of Parts
B
A
Side
Cover
RH
C
Fitment of Side Cover LH & RH
• Match slot (B) provided on front side of
'Side Cover' with bracket provided on
'Fuel Tank' and slide 'Side cover'
backward (towards Tail lamp).
• Match Lug (A) provided on rear side of
'Side cover' with hole provided on 'Frame'
and press 'Side cover' inside.
• Match the lock plate of 'Side cover'
properly with bracket on 'Chassis' and
Lock. (For 'Side cover' LH).
A
B
D
• F o r ' S i d e c o v e r ' R H a d o p t s a m e
procedure and fit the screw (D) properly.
CAUTION : Fit cover as described
above to ensure proper fitment.
9
Location of Parts
Battery
Side
Cover
RH
Battery
• It is located inside the 'Side Cover' LH.
• Always maintain electrolyte level in each
cell between upper and lower level lines
by adding distilled water.
Tool Kit
Tool Kit Location
• It is located below the seat on rear
mudguard.
• A rubber strap is provided to hold the
tool kit.
CAUTION : Always fit rubber strap to
hold the tool kit.
10