Bajaj CT-100 User Manual page 6

Location of Parts
Right Handle Bar Switches
E. Head Light Switch : It has 3 positions.
All lamps 'OFF'.
While engine running, Tail lamp, Meter
lamp and Pilot lamp/s 'ON'.
While engine running, Head lamp, Pilot
lamp, Tail lamp and Meter lamps 'ON'.
F
E
F. Ride Control Switch :
The function of 'Ride Control' is to make
rider to sense Economy zone of throttle for
better fuel efficiency. When 'Ride Control'
is in 'ON' position, on opening the throttle,
at particular position one will feel slight
resistance to the rotation of throttle grip.
This indicates the end of fuel Economy
zone. However throttle can be rotated
further to get higher speed. When switch is
in 'OFF' position, the resistance to the
throttle rotation is not sensed. Thus there
will be no indication of fuel Economy zone.
7
Location of Parts
B
A
Side
Cover
RH
C
Removal of Side Cover LH & RH
• Insert the key into the cover lock (C) and
turn the key clockwise & pull the 'Side
cover' LH out from the bottom.
• Pull 'Side cover' from (A) to release Lug
provided on 'Side cover' from hole
provided on 'Frame'.
• Slide the 'Side Cover' forward (towards
the engine) from location (B) to release
slot provided on front side of 'Side cover'
from bracket with rubber cap provided on
'Fuel Tank'. Take out 'Side cover'.
A
B
D
• Similarly 'Side cover' RH can be removed
after removing screw (D).
CAUTION : Remove cover as described
above, otherwise the lugs may break.
8
Side
Cover
RH