Deactivating The Red-Eye Reduction Lamp; Changing The Image Display Style After Shots; Changing The Image Display Period After Shots - Canon PowerShot SX432 IS User Manual

Deactivating the Red-Eye Reduction Lamp

You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Access the [Flash settings] screen.
● Press the [
settings] on the [
the [ ] button ( = 26).
2
Configure the setting.
● Choose [Red-Eye Lamp], and then
choose [Off] ( = 26).
● To restore the original setting, repeat this
process but choose [On].

Changing the Image Display Style after Shots

Still Images Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
] button, choose [Flash
] tab, and then press
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off

Changing the Image Display Period after Shots

1
Access the [Review image after
shooting] screen.
● Press the [
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
( = 26).
2
Configure the setting.
● Press the [ ][ ] buttons to choose
[Display Time]. Press the [ ][ ] buttons
to choose the desired option.
● To restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can shoot again.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Displays images until you press the shutter button
halfway.
No image display after shots.
Before Use
Basic Guide
Still Images Movies
Advanced Guide
1
2
3
] button, choose
4
5
6
7
8
9
Index
Camera Basics
Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
40