Managing The Battery Power; Power-Saving Modes - Lenovo ThinkPad P70 User Manual

DANGER
Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply
with local ordinances or regulations and your company's safety standards.
DANGER
There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery
contains lithium and can explode if it is not properly handled, or disposed of. Replace only with a
battery of the same type. To avoid possible injury or death, do not: (1) throw or immerse into water,
(2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose of
it as required by local ordinances or regulations and your company's safety standards.

Managing the battery power

To achieve the best balance between performance and power saving, adjust your power plan settings.
To adjust power plan settings, do the following:
1. Go to Control Panel, and then change the view of Control Panel from Category to Large icons or Small
icons.
2. Click Power Options.
3. Follow the instructions on the screen.
For more information, refer to the help information system of the program.

Power-saving modes

There are several modes that you can use at any time to conserve power. This section introduces each
mode and gives tips on the effective use of battery power.
• Screen blank mode (for Windows 7 only)
The computer display requires considerable battery power. To enter screen blank mode, right-click the
battery gauge icon in the windows notification area and select Power off display.
• Sleep mode
In sleep mode, your work is saved to memory, and then the storage drive and the computer display are
turned off. When your computer wakes up, your work is restored within seconds.
To put your computer into sleep mode, do the following:
– For Windows 7: Open the Start menu and click the arrow next to the Shut down button. Click Sleep
from the menu displayed.
– For Windows 10: Open the Start menu, click
• Hibernation mode
By using this mode, you can turn off your computer completely without saving files or exiting any
programs that are running. When the computer enters hibernation mode, all open programs, folders, and
files are saved to the storage drive, and then the computer turns off.
To put the computer into hibernation mode, do the following:
– For Windows 7: Open the Start menu and click the arrow next to the Shut down button. Click
Hibernate from the menu displayed.
– For Windows 10: Define what the power button does first, and then press the power button to put the
computer into hibernation mode. For more information, see "Front view" on page 1.
32
ThinkPad P70 User Guide
Power, and then click Sleep.