Lenovo ThinkPad P70 User Manual page 153

6. Open the latches on both sides of the memory slot at the same time
module 2 .
7. Insert the memory module into the memory slot at an angle of about 20 degrees
module downward until it snaps into place
the memory slot and cannot be moved easily.
Note: If you install only one memory module, install it into the slot that is close to the display.
8. Install the shielding bracket
2 . Ensure that the memory module is firmly installed in
1 and secure the screw
1 , and then remove the memory
2 .
Chapter 10
1
. Pivot the memory
137
.
Replacing devices