Table of Contents
Advertisement
If you already have a TV connected to the cable outlet, you will need to use a 5-900 MHz splitter. Connect the coaxial cable
as shown below:
SURFboard Model SB3500
2
Connect the 10Base-T Ethernet cable to the SB3500 connector marked ENET and the other end to the Ethernet jack on the
back of your computer.
3
Connect your telephone to the SB3500 connector marked
connector marked
LINE
Each line connector on the SB3500 supports up to five telephones (one REN per telephone).
4
Connect the power brick or UPS cable to the SB3500 connector marked
2.
1. A separate phone line can be connected to the SB3500
LINE
as shown in the following sections.
POWER
9
Advertisement
Table of Contents
