Sony MDS-DRE1 Service Manual page 10

BRACKET (MD)
3 two collars
4 insulator (MD)
5 compression spring
6 bracket (MD)
SLIDER (M) ASSEMBLY
1 Rotate the pully (BD) in arrow
direction A and move the slider
assembly in arrow direction B .
2 two screws
(B2.6 × 18)
slider
assembly
B
5 two compression
springs
C
A
2 two screws
3 two collars
4 insulator (MD)
5 compression spring
4 two insulators (MD)
claw B
claw A
1 Disengage a coil spring
from the claw A .
2 Disengaging the claw B ,
raise the lever (SLM)
upwards to remove.
3 Rotate the pully (BD) in arrow direction C .
claw C
4 Move the claw C on the slider
A
B
Base groove
– 10 –
(B2.6 × 18)
up to the base groove in arrow
direction A , and raise it in arrow
direction B to remove.