Controls; Setting The Clock; Time Defrosting - Blanco MF34STX Operating Instructions Manual

Table of Contents

Advertisement

CONTROLS

SETTING THE CLOCK

When the oven is first plugged in, the display will flash " :0" and a tone will sound. If the AC power
ever turns off, the display shows " :0" when the power comes back on.
1. Touch CLOCK pad.
CLOCK
This is a 12 hour clock system.
2. Touch CLOCK pad once more.
This is a 24hour clock system.
3. Enter the correct time of day by touching the numbers
in sequence.
4. Touch CLOCK pad.
CLOCK
5. Touch STOP/CLEAR pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will
sound. Touch the CLOCK pad and re-enter the time.

TIME DEFROSTING

When TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods of
alternating defrost and stand times by cycling on and off.
1. Touch DEFROST pad.
DEFROST
2. Touch number pads for the desired defrosting time.
3. Touch START pad.
When you touch START pad, the DEFROST indicator starts blinking to show the oven is in the DEFROST
mode. The display counts down the time to show you how much defrosting time is left in the DEFROST
mode. The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged.
When the defrosting time ends, you will hear 3 beeps.
NOTE: This oven has multiple clock
system. If you want 12 hour clock
system, omit this step.
The display stops blinking, and the colon start
blinking. If you selected 12 hour clock
system, this digital clock allows you to set
from 1:00 to 12:59. If you selected 24 hour
clock system, this digital clock allows you to
set from 0:00 to 23:59.
The DEFROST indicator lights and " : 0" is
displayed.
The display will show the numbers you
pressed in the order you touched.
NOTE: Your oven can be programmed for
99 minutes 90 seconds.(99:90)
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents