Operation Procedure - Blanco MF34STX Operating Instructions Manual

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a 240V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
The oven light is on only when the microwave
oven is operating.
2
The oven will automatically shut off at any time
by opening the oven door.
3
Each time a button is pressed, a BEEP will
sound to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show " : 0" when the oven is
plugged in.
6
Time clock returns to the present time when the
cooking time ends.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power button. The chart shows the display, the power level and
the percentage of power.
Press Power button
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
6
When the Stop/Clear button is pressed during
the oven operation, the oven stops cooking and
all information retained. To erase all information
(except the present time), press the Stop/Clear
button once more. If the oven door is opened
during the oven operation, all information is
retained.
7
If the Start button is pressed and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will not
start cooking until the door is completely closed
or the program has been reset.
Make sure the oven is properly installed
and plugged into the electrical outlet.
Power level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
9
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%