Control Panel - EdgeStar IB450SSP Owner's Manual

IMPORTANT
It's not recommended
that the ice size be
adjusted unnecessarily
since this could
damage the machine's
controls.
Do not let water contact
the control panel.
EdgeStar Built-in Ice Maker

Control Panel

Description of LEDs and buttons:
1. Bin Full (Red) LED: Bin full indicator light.
When this is lit, the ice storage bin is full of ice or there is
something blocking the 'bin-full' probe. The unit will stop
producing ice. When ice cubes are removed from the ice
storage bin, freeing the bin-full probe, the red LED will
remain flashing for 3 minutes, then the unit will restart and
return to the ice making mode.
2. Ice Making (Green) LED: Ice making indicator light.
When this is lit, the unit is working in the ice making mode,
controlled by a temperature probe on the evaporator. When
the green LED flashes, the unit is working in the ice making
mode controlled by a fixed timer.
3. Ice Harvest (Yellow) LED: Ice harvest indicator light.
When this is lit, the unit is working in the ice harvest mode
controlled by the ice-full probe.
4. Mode button: Mainly for service. When this is pressed, the
ice making mode changes to the ice harvest mode or vice
versa. The mode can be determined from the status of the
green and yellow LEDs.
5. Adjust button: Mainly for service. When it is pressed over
3 seconds, the unit will enter the Ice Size Adjustment mode.
The mode can be judged from the status of the yellow LED.
_
+
20