Discs - Changing The Player Settings; Disc" Menu; Video" Menu - Panasonic SC-VK870 Operating Instructions Manual

Discs — Changing the player settings
Display
1
the Setup
menu.
• The settings remain intact even if you switch the unit to standby.
• Underlined items are the factory preset.
QUICK SETUP enables successive settings of the items in the shaded area.

"DISC" menu

SETTING STATE
AUDIO
Choose the audio language.
SUBTITLE
Choose the subtitle language.
MENUS
Choose the language for disc menus.
Changing the menu language in QUICK
SETUP also changes this setting.
RATINGS
Set a ratings level to limit DVD-Video play.
PASSWORD
Change the password for "RATINGS"
( above).
Language options : FRENCH, SPANISH, GERMAN, RUSSIAN, HUNGARIAN, CZECH and POLISH
1
The original language designated on the disc is selected.
2
Input the appropriate code from the language code list ( page 24).
3
If the language selected for "AUDIO" is not available, subtitles appear in that language (if available on the disc).
4

"VIDEO" menu

SETTING STATE
TV ASPECT
Choose the setting to suit your television
and preference.
TV TYPE
Select to suit the type of television.
TIME DELAY
When connected with an AV amplifier and
Plasma display, adjust if you notice the
audio is out of sync with the video.
NTSC DISC OUT
Choose PAL60 or NTSC output when
playing NTSC discs.
22
22 22
Select the
2 3
menu.
Select
Confirm Confirm
Display the current setting of the items below
ENGLISH
OTHER ----
AUTO
4
OTHER ----
ENGLISH
Setting ratings (When level 8 is selected)
0 LOCK ALL: To prevent play of discs without ratings levels.
1 to 7: To prohibit play of DVD-Video with corresponding ratings recorded on them.
8 NO LIMIT
When setting a ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen will be shown if a DVD-Video exceeding the ratings level is
inserted in the unit. Follow the on-screen instructions.
1. Select "CHANGE" and press [OK].
2. Enter the current password with the numbered buttons, then press [OK].
3. Enter the new password with the numbered buttons, then press [OK].
If "VERIFY" is displayed, please verify the password and insert it again.
Display the current setting of the items below
4:3PAN&SCAN
16:9NORMAL
STANDARD
PROJECTION
0 ms/AUTO
60 ms
NTSC: Output signals from NTSC discs remains as NTSC.
PAL60: NTSC discs can be viewed on PAL television.
Select the Make the settings.
4
item.
Select
Confirm
(LANGUAGE OPTIONS)
3
ENGLISH
3
(LANGUAGE OPTIONS)
4:3LETTERBOX
16:9SHRINK
CRT
PLASMA
20 ms
80 ms
5
Select
Select
1 ORIGINAL
2
(LANGUAGE OPTIONS)
1
OTHER ----
4:3ZOOM
16:9ZOOM
LCD
40 ms
100 ms
Press to exit.
1
3