Print White Level / Black Level Data For Document Scanning Compensation (Function Code: 05) - Brother DCP-7080 Service Manual

1.3.2 Print white level / black level data for document scanning
compensation (function code: 05)
<Function>
This function is used to print the contrast level data for document scanning compensation.
<Operating Procedure>
Note:
• Be sure not to perform this operation procedure immediately after the power is turned
ON, but after performing the document scanning operation at least once. The machine
initializes the contrast level data and obtains the standard value for document scanning
compensation at the start of the document scanning. Therefore, this function is
inoperable without performing a document scanning operation first.
• The print result varies depending on whether color scanning or monochrome scanning
is performed immediately before this operation procedure. Check the contrast level data
you want to print and then implement the procedure below.
For models without keypad
(1) For monochrome scanning, make a
monochrome copy of the document. For
color scanning, make a color copy of the
document.
(2) Press the [▲] or [▼] key in the initial
state of maintenance mode to display
"MAINTENANCE 05" on the LCD, and
press the [OK] key.
"PRINTING" is displayed on the LCD,
and the data list for document scanning
compensation including the following
data will be printed.
Note:
• When there is no paper set in the
paper tray, printing will be
canceled.
(3) When printing is completed, the
machine returns to the initial state of
maintenance mode.
For models with keypad
(1) For monochrome scanning, make a
monochrome copy of the document. For
color scanning, make a color copy of the
document.
(2) Press the [0], and then the [5] key in the
initial state of maintenance mode. "1.
FRONT 2. BACK" is displayed on the
LCD. (Duplex scanning models only)
(3) Press the [1] or [2] key. "PRINTING" is
displayed on the LCD, and the data list
for document scanning compensation
including the following data will be
printed.
Note:
• When there is no paper set in the
paper tray, printing will be
canceled.
(4) When printing is completed, the
machine returns to the initial state of
maintenance mode.
5-5
Confidential