Fan - Brother DCP-7080 Service Manual

9.23 Fan

(1) Disconnect the fan harness from the high-voltage power supply PCB ASSY, and release
it from the securing fixtures.
(2) Release each hook to remove the fan, and pull out the fan harness from the hole.
High-voltage power
supply PCB ASSY
Fan harness
Label
Harness routing: Refer to
Assembling Note:
• When assembling the fan, insert the fan harness into the hole and slip it onto the guide
of the main frame R ASSY to make sure that the fan harness is not caught.
• Attach the fan so that the surface with the label faces out.
Fan harness
Hooks
Fan
Fig. 3-78
"4. Rear side of the
3-79
Guide
machine".
Main frame R ASSY
Hole
<Back side>
Confidential