Vehicular Battery Charger - Motorola Phone i500plus User Manual

Iden digital multi-service phone
Hide thumbs Also See for Phone i500plus:
Table of Contents

Advertisement

Vehicular Battery Charger

The NTN8978 Vehicular Battery Charger enables in-vehicle
communications by charging the NiMH battery and providing power
to your i500plus.
The power light (green LED) will light when the Vehicular Battery
Charger is receiving power.
To cigarette lighter receptacle
Figure 2. Using the Vehicular Battery Charger
Using the Vehicular Battery Charger
1.
Insert the Vehicular Battery Charger's DC plug into the Side
Charging Jack of your i500plus. Push firmly until the plug rests
securely in the Side Charging Jack.
2.
Remove the vehicle's cigarette lighter plug (if one exists) from
the cigarette lighter receptacle.
3.
Plug the Vehicular Battery Charger into the cigarette lighter
receptacle. The power light (green LED) will turn on.
While your i500plus is attached to the Vehicular Battery Charger, you
can leave the phone off, turn it on, or use it. For best charging results,
leave it off.
Removing the Vehicular Battery Charger:
1.
Unplug the Vehicular Battery Charger from the vehicle's
cigarette lighter receptacle.
2.
Gently pull the plug from the Side Charging Jack of your
i500plus.
Vehicular Battery Charger Operating Specifications
Operating voltage range: 10.8 - 33.0 Vdc.
Operating temperature range: -30°C to +60°C.
To i 500 plus
Accessories
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ntn8496 - headset - semi-open

Table of Contents