Attaching And Charging The Battery - Motorola Phone i500plus User Manual

i500plus User's Guide

Attaching and Charging the Battery

Attaching the Battery
1. Release the lock located at the
bottom of the battery door by
pressing up on the latch, and
remove the door.
2. Insert the battery with the "+" and
"-" at the top, per the figure. Install
the battery bottom first, then press
down on the battery to secure it.
3. Replace the battery cover and lock
by pressing down on the latch.
Detaching the Battery
1. Release the battery door by sliding
the battery door latch upward.
2. Remove the battery door housing
and remove the battery from the
phone.
Charging the Battery with the Standard Travel Charger
Attach the Charger to the i 500 plus via the Side Charging Jack, and
plug the Charger into an electrical outlet. For more information about
Chargers, see "Accessories" on page 37.
To get the maximum use from the battery, charge it overnight before
you use it for the first time. See Table 1 for battery charging status.
Battery and Charging Status
A low battery is indicated by a short, chirp-like sound through the
speaker. The battery strength indicator icon shows the remaining
charge in your battery. Three bars indicate full charge. As the charge is
reduced through use, the bars disappear. The indicator flashes when
you have less than five minutes of talk time.
Table 1: Battery Charging Status
Icon
Flashes
Charging Low Battery
Discharging Low Battery
4
1
0-30% 31-60% 61-90%
0-10% 11-40% 41-70%
2
91-100%
71-100%