Select Options; Program Chart - Asko W6984 FI Operating Instructions Manual

Washing

Program chart

Pre-
Program wash Temp. °C
1. Auto
2. Stain prog
3. Time program
X 95
4. Heavy
X 60
60
5. Normal
40
6. Everyday wash 60
7. Quick 40
8. Easy Care 40
9. Synthetics 40
10. Wool 30
11. Hand 30
12. Rinse
13. Spin
14. Drain
Consumption data may vary from the given values depending on variations in water pressure, water hardness, water inlet temperature, room
temperature, fluctuations in the electricity, type and volume of the laundry and any extra options.
6

Select options

You can select options to adjust the wash
program to suit your own specific
requirements. The available options depend on the
selected program. If the option is available for the
selected program, the symbol is shown in the display.
The machine will remember the options you select
for each program (with one exception - Delayed
Start). You can still change the selected options the
next time you select the program in question.
Number of
Spin Speed Max. load
Rinses rpm ( kg)
5 1800 7
5 1800 7
2 1800 7
2 1800 7
3 1800 7
3 1800 3.5
2 1200 3.5
4 800 2.5
3 800 2.3
3 800 2.3
1 1800 3.5
1800 3.5
Water consump-
tion Energy consumption
(approx. liter) (approx. kWh)
85 2.2
75 1.2
50 1.13
50 0.47
60 1.1
35 0.4
60 0.6
40 0.4
70 0.5
70 0.5
15 0.1
0.1
Temperature
• Choose the temperature by pressing the program
selector (the big arrow) until a temperature is
highlighted.
• Press the up or down arrow button until the correct
temperature is displayed. You can select
temperatures between Cold and 95 °C. If you
select Cold, the washing temperature will be the
same as that of the water entering the machine.
For Wool you cannot choose a temperature higher
than 40 °C and for Hand not higher than 30 °C.
The maximum temperature for Time program is
60 °C.
• Press the Start/Stop button to start the program
or press the program selector (the big arrow)
again to choose more options.
Spin
• Select the spin speed by pressing the program
selector (the big arrow) until spin is highlighted.
• Press the up or down arrow button until the correct
speed is displayed. You can select speeds
between 400 and 1800 rpm,
Program time
(approx. hrs and min.)
2:45
2:40
3:55
3:40
1:40
0:50
1:40
1:20
0:50
0:50
0:20
0:15
0:01
(no spin) or
15