Select Options And Settings - Asko W6222 Operating Instructions Manual

Operating instructions
6

Select options and settings

By changing options and settings you
can adjust the washing program to suit
your own specific requirements.
The machine remembers which settings and
options you choose for each program and
uses them the next time you select the same
programs. You can of course change the op-
tions at any time.
105 120
85
Cold
800
1200
Temperature
Select temperature by pressing the Tempera-
ture button until the red field lights up beside
the desired temperature.
You can select temperatures between 86°F
(30°C) and 203°F (95°C) or Cold. If you select
Cold, the washing temperature will be the
same as that of the machine's water supply.
For Wool/Hand it is not possible to select a
temperature higher than 104°F (40°C). See
the table.
140
205
Customer Care Center
1-800-898-1879
www.askousa.com
Spin speed/No spin
Select the spin speed by pressing the Spin
button until the red field next to the spin speed
you want lights up.
You can select speeds between 800 and
1200 rpm, No spin
Spin at 800 rpm always signifies short spin.
For certain programs, it is not possible to se-
lect a speed in excess of 800 rpm (see table).
No spin means the program does not include
a spin cycle and ends by draining.
Super Rinse
Use the Super Rinse option if you want to in-
crease the number of rinses. The maximum
number of rinses is seven and varies depend-
ing on the selected program. This option
cannot be selected with Wool/Hand, Rinse,
Spin, or Drain.
The machine remembers this setting and uses
it the next time you select the same program.
To deactivate Super Rinse, press the
Start/Stop button for 3 seconds. The red field
will go out.
A lighted red field around the button indicates
that the option has been activated.
21