Thermostat And Thermostat Cover; Spark Plug; Distributor; Center Cover - Mazda 626 1989 Workshop Manual

1 B
ASSEMBLY (AUXILIARY PARTS)
1B -70

Thermostat and Thermostat Cover

1. Install the thermostat into the cylinder head with
the jiggle pin at the top.
2. Position a new gasket with the printed side facing
the cylinder head.
3. Install the thermostat cover.
Tightening torque:
19—30 N-m (1.9—3.1 m-kg, 14—22 ft-lb)

Spark Plug

1. Apply anti-seize compound or molybdenum-based
lubricant to the spark plug threads.
2. Install the spark plugs.
Tightening torque:
15—23 N m (1.5—2.3 m-kg, 11—17 ft-lb)

Distributor

1. Apply engine oil to the O-ring, and position it on
the distributor.
2. Apply engine oil to the blade.
3. Install the distributor.
4. Loosely tighten the distributor mounting bolt.
Note
The distributor blade and the distributor drive
groove are offset to prevent mistake instal­
lation.

Center Cover

Install the center cover.
Tightening torque:
8—12 Nm (80—120 cm-kg, 69—104 in-lb)
Engine Mount Bracket
1. Install the engine mount bracket.
Tightening torque:
85—117 N-m (8.7—11.9 m-kg, 63—86 ft-lb)
2. Install the stay to the engine mount bracket.
Tightening torque:
37—52 N-m (3.8—5.3 m-kg, 27—38 ft-lb)
76GQ1B-101