Toyota 2001 Sequoia Owner's Manual page 192

"MODE" button
This button is used to select the item.
Every time you push the "MODE" button,
the display toggles.
For more details, see "—Outside tempera-
ture and cruise information display" on
page 189 in this section.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
186
01_SEQUOIA_U (L/O 0009)
—Garage door opener
2001 SEQUOIA (OM34414U)
The garage door opener (HomeLink
Universal Transceiver) is manufactured
R
under license from HomeLink and can
be programmed to operate garage
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink R
The HomeLink R in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into
HomeLink R , install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
HomeLink R during the programming pro-
cess.
For Canadian users, follow the procedure
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
market".
1. Decide which of 3 HomeLink R buttons
you want to program. Push and hold
down one of the buttons until the indi-
cator corresponding to the selected
channel begins to flash.
R
the