Toyota 2001 Sequoia Owner's Manual page 179

"AUTO" button
For automatic operation of the air condi-
tioning, press the "AUTO" button. An indi-
cator light will illuminate to show that the
automatic operation mode has been se-
lected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow, on−off of the air condi-
tioning and air intake according to the
temperature.
When you press the "AUTO" button with
the air intake mode at FRESH, internal
circulation may be applied for maximum
cooling.
When you adjust the temperature selector
button to maximum cooling, a "MAX
COLD" message will appear on the display
and the air intake mode will be automati-
cally changed to RECIRCULATE.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the "OFF" button.
01_SEQUOIA_U (L/O 0009)
Fan speed selector
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
In automatic operation, the fan speed is
adjusted automatically unless you desire
another fan speed mode.
Temperature selector
Turn the knob to adjust the temperatu-
re—to the right to warm, to the left to
cool.
The temperature display changes between
"_C" and "_F" when the unit of the outside
temperature display is changed. (For de-
tails, see "Multi−information display" on
page 184 in Section 1−9.)
"OFF" button
Push the button to turn off the air condi-
tioning system.
2001 SEQUOIA (OM34414U)
Air flow selector, "MODE" button
Press the button to select the vents used
for air flow.
In automatic operation, the air flow mode
is selected automatically among Panel, Bi−
level and Floor unless you desire another
air flow mode.
1. Panel—Air flows mainly from
instrument panel vents.
the
173