Traction Motor; Service Specifications - Toyota 2007 Camry Hybrid Owner's Manual

Service specifications

ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.19—0.29 (0.007—0.011)
Exhaust 0.38—0.48 (0.015—0.019)
Spark plug type:
DENSO SK20R11
NGK IFR6A11
Spark plug gap, mm(in.):
1.1 (0.043)
NOTICE
Use only above spark plugs. Do not
adjust gaps for engine performance or
smooth driveability.
382
'07Camry hybrid_U (L/O 0610)
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt., Imp.
qt.):
With filter 4.3 (4.5, 3.8)
Without filter 4.1 (4.3, 3.6)
"Toyota Genuine Motor Oil" is used in
your Toyota vehicle. Use Toyota approved
"Toyota Genuine Motor Oil" or equivalent
to satisfy the following grade
viscosity.
Oil grade:
ILSAC multigrade engine oil
Recommended oil viscosity:
SAE 5W−20 or 0W−20
Outside temperature
Please contact your Toyota dealer for fur-
ther details.
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.):
Engine
6.2 (6.6, 5.5)
Inverter, traction motor and motor gener-
ator
2.9 (3.1, 2.6)
Coolant type:
and
"Toyota Super Long Life Coolant" is
used in your Toyota vehicle at factory
fill. In order to avoid technical problems,
only use "Toyota Super
Coolant" or similar high quality ethylene
glycol based non−silicate, non−amine,
non−nitrite, and non−borate coolant with
long−life hybrid organic acid technology.
(Coolant with long−life hybrid organic
acid technology is a combination of low
phosphates and organic acids.)
Do not use plain water alone.
Please contact your Toyota dealer for
further details.
2007 CAMRY HV from Oct. '06 Prod. (OM33749U)
Long Life