Toyota 2007 Camry Hybrid Owner's Manual page 255

Air flow selector button
Push the button to select the vents used
for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air flows mainly from
instrument panel vents and the rear
vents.
2. Bi−level—Air flows from both the floor
vents, the instrument panel vents and
the rear vents.
3. Floor—Air flows mainly from the floor
vents.
'07Camry hybrid_U (L/O 0610)
4. Floor/Windshield—Air
from the floor vents and windshield
vents.
This position allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air in-
take selector button once again.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears
the front view more quickly.
the
flows mainly Windshield air flow button
When this button is pressed, air flows
mainly from the windshield vents and
turns on the defogging function with the
purpose of clearing the front view.
Pressing this button once again returns
the air flow mode to the last one used.
This button allows the air intake to select
FRESH automatically. This is to clean up
the front view more quickly. It is not pos-
sible to return to RECIRCULATE in this
mode.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
For details about air flow selector settings,
see "—Air flow
scribed below.
When the "POWER" switch is set at ON
after the 12 volt battery is reconnected,
the indicator light on the button may flash
and a motor sound may be heard. This
does not indicate a malfunction.
2007 CAMRY HV from Oct. '06 Prod. (OM33749U)
selector settings" de-
243