Chevrolet Camaro 2016 Operating Manual page 236

shifted. The cruise is disengaged if
the clutch is pressed for several
seconds.
®
If the StabiliTrak system begins to
limit wheel spin while using cruise
control, the cruise control
automatically disengages. See
Traction Control/Electronic Stability
Control 0 226. When road
conditions allow you to safely use it
again, cruise control can be turned
back on.
If the brakes are applied, cruise
control disengages.
Cruise Control with Cancel Button
Cruise Control without Cancel
Button
1
: If equipped, press to turn the
system on and off. A white indicator
appears in the instrument cluster
when cruise is turned on.
: If equipped, press to disengage
cruise control without erasing the
set speed from memory.
RES+ : If there is a set speed in
memory, press briefly to resume to
that speed or hold upward to
accelerate. If cruise control is
already active, use to increase
vehicle speed.
Driving and Operating
SET : Press briefly to set the
speed and activate cruise control.
If cruise control is already active,
use to decrease speed.
Setting Cruise Control
1
If is on when not in use, SET or
RES+ could get bumped and go into
cruise when not desired. Keep
when cruise control is not
being used.
1
1. Press to turn cruise
control on.
2. Get up to the speed desired.
3. Press and release SET .
4. Remove your foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster 0 106.
235
1
off