System (Abs) - Chevrolet Camaro 2016 Operating Manual

Hide thumbs Also See for Camaro 2016:
Table of Contents

Advertisement

The system is activated and
deactivated by pressing either of the
paddles marked REV MATCH on
the steering wheel. The system
must be activated with each new
ignition cycle.
A gear indicator in the instrument
cluster displays the current gear
selected:
When ARM is activated, the
gear number is amber.
When ARM is deactivated, the
gear number is white.
If no gear number is displayed
while the shift lever is in gear,
service is required. ARM will be
disabled, and the malfunction
indicator lamp will be on. See
Malfunction Indicator Lamp
(Check Engine Light) 0 118. The
clutch and manual transmission
will continue to operate normally.
ARM will also:
Be active above 16 km/h
(10 mph).
Match engine speed up to
5400 rpm.
Not operate when the
accelerator pedal is applied.
Be disabled when the coolant
temperature is below
0 °C (32 °F).
Driving and Operating
Brakes
Antilock Brake

System (ABS)

This vehicle has ABS, an advanced
electronic braking system that helps
prevent a braking skid.
When the vehicle begins to drive
away, ABS checks itself.
A momentary motor or clicking noise
might be heard while this test is
going on, and it might even be
noticed that the brake pedal moves
a little. This is normal.
If there is a problem with ABS, this
warning light stays on. See Antilock
Brake System (ABS) Warning
Light 0 121.
223

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camaro 2018

Table of Contents