Table of Contents
Advertisement
110
Instruments and Controls
Speed Warning : The Speed
Warning display allows the driver to
set a speed that they do not want to
exceed. To set the Speed Warning,
press
when Speed Warning is
displayed. Enable the speed
warning and then use
adjust the value. Press SEL to set
the speed. Once the speed is set,
this feature can be turned off by
pressing SEL while viewing this
page. If the selected speed limit is
exceeded, a pop-up warning is
displayed with a chime.
Display Option (Uplevel) : Press
SEL while Display Option is
highlighted to change the
configuration of the uplevel cluster.
See Reconfigurable Instrument
Cluster earlier in this section.
Info Pages : Press
while Info
Pages is highlighted to select the
items to be displayed in the DIC info
displays. See Driver Information
Center (DIC) 0 124.
Software Info : Press
Software Info is highlighted to
display open source software
information.
Speedometer
or
to
The speedometer shows the
vehicle's speed in either kilometers
per hour (km/h) or miles per
hour (mph).
Odometer
The odometer shows how far the
vehicle has been driven, in either
kilometers or miles.
Trip Odometer
The trip odometer shows how far
the vehicle has been driven since
the trip odometer was last reset.
The trip odometer is accessed and
reset through the Driver Information
Center (DIC). See Driver
Information Center (DIC) 0 124.
Tachometer
while
The tachometer displays the engine
speed in revolutions per
minute (rpm).
If the engine is operated with the
rpm s in the warning area at the
high end of the tachometer, the
vehicle could be damaged, and
the damage would not be covered
by the vehicle warranty. Do not
operate the engine with the rpm s
in the warning area.
Caution
Hide quick links:
Advertisement
Chapters
Table of Contents
