Motorola MEA 3.1 User Manual page 14

2. Obtain the transceiver MAC address and the ETH address that was recorded earlier in
section 2.3.1. The address will be in the format 00-05-12-0A-xx-yy for the transceiver and
00-05-12-30-xx-yy for ETH.
3. From the MeshManager software screen, display the devices using the MAC address.
Note: This step assumes that the MeshManager software has been installed and running on
a networked computer.
4. Within the MeshManager software screen, select the appropriate VMM in the device tree.
5. Right-click on the device MAC address and select the Ping option.
A successful response to the Ping command verifies that the VMM is communicating to the
infrastructure devices.
6