Temperature Switch Monitor; Operating The Refrigerator Controls (N62X, N62Xxx, N82X, And N82Xxx Models); Control Panel - Norcold N62X Owner's Manual

- When you push the TEMP SET button, the temperature setting flashes in the
center display for ten seconds.
- After the temperature setting flashes, the mode of operation appears in the
center dispaly.
- The backup operating system can overfreeze or thaw the contents of the freezer
and the fresh food compartment.
- Make sure the temperatures of the freezer and the fresh food compartment are
satisfactory.

Temperature switch monitor:

The refrigerator is equipped with a temperature switch [142] for overheating protection
(See Art01869) . A Norcold authorized service technician can determine if this switch
has been triggered.
If you open the door(s) too often, the temperatures inside the freezer
NOTICE
and fresh food compartment do not become stable. Allow the
refrigerator to operate for about one hour after each adjustment change
before you examine the contents. The number "9" is the coldest
temperature setting.
- If the temperature is too warm, push and hold the TEMP SET button to raise the temperature setting by one number.
- If the temperature is too cold, push and hold the TEMP SET button to lower the temperature setting by one number.
- Have the refrigerator serviced by your dealer or a Norcold authorized Service Center as soon as possible.
Operating the Refrigerator Controls
(N62X, N62XXX, N82X, and N82XXX models)

Control panel:

The refrigerator control panel (see Art01019) is between the freezer
compartment and the fresh food compartment. A 12 volt DC power
supply is necessary for the control functions of the refrigerator
to operate. The refrigerator receives DC power from the 12 volt
system of the vehicle; either an auxiliary battery, a converter, or the
vehicle engine battery.
The ON / OFF button [30] starts and shuts down the refrigerator:
- To turn on the refrigerator, push and release the ON / OFF
button.
- To turn off the refrigerator, push the ON / OFF button for one
second and then release.
The TEMP SET button [32] controls the temperature adjustment of the freezer and the fresh food compartment. The temperature
adjustment that you select does not change if the mode of operation of the refrigerator changes.
- Push the TEMP SET button and the temperature setting "1-9" appears in the center display [33].
- Push and hold the TEMP SET button and the temperature setting changes.
- When the desired temperature setting shows, release the TEMP SET button.
- The temperature setting shows for ten seconds and then the current operation mode of the refrigerator shows.
- The number "9" is the coldest temperature setting.
Art01869
35
AC
AUTO
1-COLD
Art01019
33 34
142
36
LP GAS TEMP
ON
MODE
SET
OFF
COLDEST-9
31
32
Owner's Manual 7
30