Honda 2007 Accord 4-Door Owner's Manual page 233

０６／０５／１６ １４：２７：０４ ３１ＳＤＡ６４０ ０２３２
BLADE
3. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
BLADE
REINFORCEMENT
4. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Wiper Blades
5. Slide the new wiper blade into the
holder until the tabs lock.
6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
7.
the windshield, the passenger's
side first, then the driver's side.
227