Honda 2007 Accord 4-Door Owner's Manual page 123

０６／０５／１６ １４：１２：４９ ３１ＳＤＡ６４０ ０１２２
SCAN The scan function samples
−
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds.
If you do nothing, the system will
scan for the next strong station and
play it for 5 seconds. When it plays a
station you want to listen to, press
the SCAN button again.
Preset Each preset bar or icon
−
can store one frequency on AM, and
two frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
bar or icon.
With navigation system
Push the AUDIO DISPLAY button
to view the preset icons.
2. Use the tune, seek, or scan
function to tune the radio to a
desired station.
Playing the AM/FM Radio
3. Pick the preset number (1
you want for that station. Press
the left or right side of the bar or
icon and hold it until you hear a
beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
CONTINUED
6)
−
117