Honda 2007 Accord 4-Door Owner's Manual page 229

０６／０５／１６ １４：２６：３９ ３１ＳＤＡ６４０ ０２２８
Replacing Back-up Light Bulbs
TRIM CLIPS
1. Open the trunk.
V6 models
2.
Remove the trim clips from the
right or left corner of the trunk lid
trim by carefully prying them
using a small, flat-tip screwdriver
wrapped with tape.
BULB
SOCKET
3. Carefully bend back the corner of
the trunk lid trim to expose the
bulbs.
4. Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
Lights
BULB SOCKET
5. Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
6. Test the light.
7. Push the trunk lid trim back into
position.
8. Press the trim clips back into their
holes.
223