Honda 2007 Accord 4-Door Owner's Manual page 225

０６／０５／１６ １４：２５：５６ ３１ＳＤＡ６４０ ０２２４
High Beam Headlight
FASTENERS
4-cylinder models
1. Open the hood. To change a bulb
on the passenger's side, undo the
two fasteners and remove the air
intake cover.
AIR INTAKE
COVER
FASTENERS
V6 models
2. Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb.
AIR INTAKE
COVER
4-cylinder models
3. Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
4. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Lights
BULB
TAB
CONTINUED
219