Before You Start; Table Of Contents - Honeywell Evohome Installation Manual

Thanks for choosing evohome
evohome means more comfort, and
more control of the heating system. It's
simple to install and easy to use.
Follow these instructions to set up the
evohome system. Devices that need to be
connected to the mains electricity supply
should be installed by a competent person.

Before you start

Make sure you have all the devices you need
for your system. If you used our 'Design
your evohome system' guide, match each
device to the room or zones in your plan.
It's a good idea to carry out all the mains
electrical and other wiring work first.
In this guide
Step 1: Wire up the heating system
Step 2: Set up your evohome Controller
Step 3: Power up and bind devices
Step 4: System test
Configuration and modification
Appendix
evohome Installation Guide 1
3
9
13
29
37
41