Table of Contents
Advertisement
gis
11.6.2
Setting day and time
To enter the time and day:
MENU
WEEK PROGRAM
^ EXTRA PERIOD
ȻSETTINGS
1. Call up the menu for entering the day and time as
follows:
2.
: SETTINGS.
Confirm with
.
The display shows the menu for settings.
3. Scroll with
and
to DAY/TIME
Confirm with
.
SETTINGS
LANGUAGE
^»DAY/TIME
È SPECIFICATIONS
The display shows the sub-menu for adjusting the
day.
DAY
»Sunday
^ Monday
È Tuesday
Wednesday
Thursday
Friday
Saturday
4. The cursor is positioned beside Sunday.
Scroll with
and
to the desired day.
Confirm with
.
The day has been set. The display shows the sub-
menu for adjusting the time.
TIME
»00:00
5. The cursor moves to the hour digits, which flash.
Scroll with
and
to the current hour, for
example 15.
Confirm with
.
TIME
15»00
6. The cursor moves to the minute digits, which flash.
Scroll with
and
to the next minute, for example
45.
Instruction manual ADMR
Confirm the minute setting with
TIME
15»45
The time has been set.
Note
The appliance takes no account of daylight saving.
11.6.3
Displaying appliance specifications
Note
This category is solely intended for the installation
engineer and/or service and maintenance engineer.
The table shows the standard settings for the
appliance specifications.
Appliance specifications
Regulation interval
Flue gas safety
Call up the menu to display the appliance
specifications as follows:
1.
: SETTINGS.
Confirm with
.
MENU
WEEK PROGRAM
^ EXTRA PERIOD
ȻSETTINGS
to SPECIFICATIONS
2. Scroll with
Confirm with
.
SETTINGS
LANGUAGE
^ DAY/TIME
ȻSPECIFICATIONS
The display shows the sub-menu for displaying
appliance specifications.
SPECIFICATIONS
»REGULATION INTERVAL
FLUE GAS SAFETY
3. Scroll with
to the section to be displayed, for
example REGULATION INTERVAL
The relevant display appears
REGULATION INTERVAL
_
40
80ÉC
ADMR 40 - 135
40 - 80 °C
75 °C
61
Advertisement
Table of Contents
Troubleshooting
