(Spares may be obtained from your before servicing. BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard » Do not allow to be used as a toy.
4. Line up tabs on the cuff of the hose with the notches on back of vacuum, twist hose clockwise to lock into place 5. Slide other end of hose into hose wand base and place hose over upper hose wrap 6. Slide tools into place *Product images may vary www.BISSELL.com...
Thanks for buying a BISSELL vacuum We’re glad you purchased a BISSELL Safety Instructions... 2 vacuum. Everything we know about Quick Start Guide... . 3...
4. Slide the dusting brush into the opening below the upper hose wrap. 5. The TurboBrush/TurboEraser pet tool (on select models) secures to the back of the handle in the mount above the upper hose wrap. www.BISSELL.com...
» Hair, string and small objects can block the » Before cleaning under low furniture, check area vacuum hose or tools. Check them occasionally first for objects that might harm the unit or block for obstructions. the vacuum hose. *Product images may vary www.BISSELL.com...
Page 8
Operations Special tools NOTICE Your BISSELL vacuum is not only a powerful Pet Hair Lifter (model 8531) carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when Just vacuum like you normally would and the pet hair you select one of the special tools.
Follow the instructions on the following pages NOTICE to perform these simple maintenance steps. While vacuuming, certain carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. www.BISSELL.com...
Page 10
Make sure it is completely dry before replacing. Cleaning the pre-motor filter and inner cyclone Use only genuine BISSELL replacement filters in your BISSELL vacuum. 1. Unplug the cleaner from electrical outlet. a. Remove the Easy Empty dirt tank and locate the pre-motor filter as described on the previous page.
Page 11
Maintenance & Care Replacing the post-motor filter Use only a genuine BISSELL replacement post-motor filter in your BISSELL vacuum. 1. Unplug the cleaner from electrical outlet. 2. The post-motor filter assists in the filtration process to return clean air to the room. Replace Post-Motor the post-motor filter every three to six months.
Maintenance & Care Replace drive belt WARNING Use only a genuine BISSELL style 9 replacement belt (#203-1093) in your BISSELL vacuum. To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before 1.
Do not use sharp objects like a clothes hanger, as these may puncture the hose. 7. If the clog persists, follow the instructions for Checking the rotating floor brush on page 11 and inspect the air passageway for obstructions. www.BISSELL.com...
Please do performed by an authorized service representative. not return Thank you for selecting a BISSELL product. this product For any questions or concerns, BISSELL is happy to to the store. be of service. Contact us directly at 0344.888.6644. www.BISSELL.com...
Replacement Parts These items are available for your BISSELL vacuum. Call 0344.888.6644 or visit www.bissell.com PART # PART NAME PART # PART NAME 160-1216 Brush Roll (13.5”) 203-1093 Style 9 Drive Belt (2-Pack) 203-2662 Pre-Motor Filter 203-2665 Hose Assembly 203-2663...
BISSELL Consumer Care or contact your local distributor. BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR (A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE This Guarantee is given to the original purchaser of the product from NEGLIGENCE OF OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS;...