ComPonEnT namEs anD funCTions
Dome Cover
1
rotate base : control rotating angle of camera.
3
Vari-focal lens module : 3 ~ 10.0mm (F1.4).
➍
function setup switch : Display the menu on the screen and move the cursor to four
5
Video output Terminal to monitor
6
Pan base : Control panning angle of camera.
7
Power input Connector
8
rs-485- : Signal port for RS-485 communication.
9
rs-485+ : Signal port for RS-485 communication.
❿
D & n input Terminal : You can switch to Day & Night Mode by connecting an external
⓫
ground Terminal.
⓬
Video output Jack : Video signals are output through this port. Connect this port to the
⓭
ir lED : These infrared LED's are controlled by the illumination sensor.
⓮
illumination sensor : Detects incoming light to control the IR LED.
⓯
alarm ouT : Output port that signals when a motion is detected
⓰
directions to confirm status or after changing a selected item.
signal to this terminal.
Video IN port of a monitor.
shield Case
2
English_11