Rear View - Zotac ZBOX nano User Manual

Rear view

Refer to the diagram below to identify the components on this side of the system.
1. Wi-Fi antenna connector
The Wi-Fi antenna connector supports the included Wi-Fi antenna.
2. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use the ports for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
3. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connection to a
local area network (LAN) with speeds of 10/100/1000Mbps.
4. USB 2.0 ports
The USB (Universal Serial Bus) port is compatible with USB devices such as
keyboards, mice, cameras and hard disk drives.
5. HDMI output
The HDMI (High Definition Multimedia Interface) port supports a Full-HD device
such as an LCD TV or monitor to allow viewing on a larger external display.
6. DisplayPort
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel)
display connections.
7. VGA port
The VGA port supports connection to analog monitors and displays
8. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack.
Power supplied through this jack supplies power to the mini-PC. To prevent damage
to the mini-PC, always use the supplied power adapter.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it
away from your body.
Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.
3
1
2 4
7
3
5 6 8
ZOTAC ZBOX nano
7