Zotac ZBOX nano User Manual page 16

ZOTAC ZBOX nano
5
5. Connecting the WiFi antenna module
Connect the included WiFi antenna to the WiFi antenna connector.
6. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
7. Connecting a VGA display
Connect the VGA connector to the VGA port.
8. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
Note: When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
16
6
7
8