Motorola E365 User Manual page 111

Problem
My phone beeped
when I attached the
data cable, but my
fax and data
applications don't
work.
When sending data
with the data cable,
why does the
computer show a
connection rate of
19200 Kbps?
I can't end my data
call by closing the
application on my
computer. What can
I do?
I launched the
micro-browser but
the display says:
Service Not Available
Solution
Some wireless networks may not
support data or fax transmission. If
you are roaming on an unfamiliar
network, this may be the case.
Also, remember that data and fax
transmission usually requires a
subscription. Call your service
provider for more information.
19200 Kbps is the data transfer rate
of the connection between your
computer and the phone in a
standard CSD (Circuit Switch Data)
connection. The rate of the
connection between your phone and
the network is displayed on your
phone, and will be either 14400 or
9600 Kbps.
A GPRS connection may have a
higher data transfer rate.
Try pressing O on your phone. Also
try disconnecting the cable or turning
off the phone. If possible, always
close the connection through your
computer. These alternative methods
may disrupt the application on your
computer.
You may be in an area without
service, or you may be connected to
a network that does not support
. Internet access.
Troubleshooting - 111