Setting The Initial Volume Level On The Tv - Sony PCS-1600 Operating Instructions Manual

When using a Sony TV monitor
The TV monitor can be operated from the Remote
Commander.
For details on operating the Remote Commander, see "To
operate a Sony TV monitor" on page 154.
To adjust the TV monitor screen
Use the controls on the TV monitor to adjust the screen
(picture, hue, contrast, brightness, and sharpness).
For details on adjusting the screen, refer to the operating
instructions supplied with the TV monitor.
Note
Do not activate the surround function of the TV monitor. This
causes strange sounds since the echo canceler on the Compact
Processor will not function properly.

Setting the Initial Volume Level on the TV

When you adjust the volume, use the VOLUME/DOC-
BRIGHT +/– buttons on the Remote Commander.
1
2
Set the volume level to the middle position by pressing the
VOLUME/DOC-BRIGHT +/– buttons on the Remote
Commander.
Adjust the volume with the TV monitor's control.
Set it to the proper level for listening to a remote party.
Chapter 1 Preparation
19