Turning Off
1
Press the
The message "Power off?" appears on the monitor screen.
2
Press the V, v, B or b button on the Remote Commander to select "Power
off", and press the ENTER button.
You can power off the unit by pressing the
Remote Commander.
The unit turns off.
3
Turn off the power of other equipment used for the communication.
Notes
• Turn off the power switch on the unit when the unit will not be used for an extended
period. While the power switch is off, you cannot receive a call from a remote party.
• Be sure to unplug the power cord after the power of the unit is turned off completely.
• If the unit is left unplugged for about one week or longer, the clock setting of the
system may reset. In such cases, set the date and time again in the Clock Set page of
the General setup menu.
Adjusting the Volume on the TV Monitor
The procedure for volume adjustment during system setup differs from the
procedure during communication.
Adjust the volume on the TV monitor during system setup, and adjust the
system volume during communication.
Volume adjustment during setup
Adjust the system volume before adjusting the volume on the TV monitor.
1
Press the VOLUME +/– buttons on the Remote Commander to set the
volume level on the adjustment bar displayed on the screen to the middle
position.
2
Adjust the volume on the TV monitor so that you can properly hear a
remote party's speaking.
24
Turning the Unit On/Off
(power) switch on the unit.
1
@
/
1
(power) button on the
11