Canon MultiPASS MP390 Service Manual page 92

#6 GENESIS (UHQ function settings)
Tampering with this setting may cause the scanned image quality to deteriorate. Do not change these settings.
#8 CLEAR
(Data initialization mode
settings)
#9 ROM
(ROM management)
#10 CS SET
SERVICE REPORT
TEST MODE
F-4-7
NOTE:
If USER SW is selected from #8 CLEAR, the memory management of the user data is not cleared. If TEL or
SERVICE SW is selected, the memory management of the user data is cleared.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
MAIN:WLD-10-03
030217 DB03 FFFF
USB :05.12
CPU :WLD-01-01-CPU
021030 6511 FFFF
1.SERVICE & SYSTEM
2.SERVICE DATA
3.SYSTEM DUNP
Dialling data initialization
User data and service data #1 t
initialization
User data and service data #1 t
#6 to #7 initialization
#4 NCU setting data initializatio
Data on system dump list initial
Data on activity report initializat
Total number of pages printed/s
All user data, service data, activ
management data, and image d
initialization (except COUNTER
Version No. and Checksum disp
Chapter 4
4-15