4.3.5 Multicast Paging Settings
IPv6 Address (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
Port (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
Priority (Group 1–3)
Description
Value Range
Default Value
Configuration File Reference
Label (Group 1–5)
Description
Value Range
Default Value
Configuration File Reference
Enable Transmission (Group 1–5)
Description
Value Range
Default Value
90
Administrator Guide
Specifies the IPv6 address for multi-cast paging for each channel
group. {Priority: Group 5 > Group 4 > Group 3, Group2, Group1
(depending on the configuration)}
FF00::/8
Not stored.
MPAGE_IPV6_ADDRm (Page 228)
Specifies the port number for multi-cast paging for each channel group.
0–65535
0: Disable
0
MPAGE_PORTm (Page 228)
Selects the priority of the low priority channel group.
The priority of multi-cast paging group1-3 is lower than the talking.
Priority 4 is higher than Priority 5.
4, 5
5
MPAGE_PRIORITYm (Page 229)
Specifies a label for each channel group.
Max. 24 characters
Not stored.
MPAGE_LABELm (Page 229)
Selects the sending multi-cast paging.
•
Yes
•
No
No
Document Version 2015-07