Auto Dns Via Dhcp; Dns1; Dns2; Ipv6 - Panasonic KX-HDV230 Administrator's Manual

Default Value
Configuration File Reference

Auto DNS via DHCP

Description
Value Range
Default Value
Configuration File Reference

DNS1

Description
Value Range
Default Value
Configuration File Reference

DNS2

Description
Value Range
Default Value
Configuration File Reference

4.3.1.3 IPv6

Connection Mode

Description
Value Range
Document Version 2015-07
Not stored.
STATIC_GATEWAY (Page 187)
Selects whether to enable or disable the DNS server obtained by
DHCPv4.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Yes: Use DNS obtained by DHCPv4
•
No: Not use (use static DNS)
Yes
DHCP_DNS_ENABLE (Page 188)
Specifies the IP address of primary DNS server for IPv4.
Max. 15 characters
n.n.n.n [n=0–255]
Not stored.
USER_DNS1_ADDR (Page 187)
Specifies the IP address of secondary DNS server for IPv4.
Max. 15 characters
n.n.n.n [n=0–255]
Not stored.
USER_DNS2_ADDR (Page 188)
Selects the IP address setting mode for IPv6.
•
DHCP
•
Static
•
Stateless Autoconfiguration
4.3.1 Basic Network Settings
Administrator Guide 79