QSee QT SERIES User Manual page 60

Preset
Clicking a Setting button in the Preset
column will bring up another window
And, selecting Setting will bring up the
camera view along with a control panel to
program the camera's motion.
The dome's rotation can be controlled vertically, horizontally and diagonally along with its
speed. The lens zoom, focus and iris (light level) can be set as well. Select the number you
want to assign to this set of actions and click the Save button to save your preset. You can
hide the control panel by clicking on the "-" button or right-clicking on the screen. The control
panel can be unhidden by right-clicking on the screen again. The X button will exit the control
interface.
Cruise
Selecting a Setting button from the Cruise column will open the Cruise window.
Select Add or double-click on an existing line
to modify and the CRUISE PRESET window
will open.
Delete will remove a selected cruise line
Clear All will remove all of the cruise lines.
The set of icons to the right of the screen are
used to configure each cruise setting.
Preview – Preview the cruise to ensure that
you have the desired results.
118
PRESET - Channel 1 PRESET - Channel 1
No. No. Enable Enable Name Name Preset Preset
1 1 preset001 preset001 Setting Setting
Setting Setting
2 2 preset002 preset002
Setting Setting
3 3 preset003 preset003
Setting Setting
4 4 preset004 preset004
Setting Setting
5 5 preset005 preset005
Setting Setting
6 6 preset006 preset006
Setting Setting
7 7 preset007 preset007
Setting Setting
8 8 preset008 preset008
Setting Setting
9 9 preset009 preset009
Setting Setting
10 10 preset010 preset010
OK OK Exit Exit
PICTURE 7-4
01 01 02 02 03 03 04 04 05 05 06 06 07 07 08 08 All All
No. No.
1 1
Zoom Zoom
Focus Focus
Save Save
Iris Iris
Speed: 5 Speed: 5
PICTURE 7-5
PICTURE 7-6
PICTURE 7-7
Name Symbol What it Does
Opens a window to allow the user to set the speed and time of a new
Add
preset point
Delete Deletes a preset point
Opens the settings window for the selected preset point allowing you
Modify
to change the settings
Enables the user to alter the position of a setting in the cruise order.
Arrows
Move a preset point all the way to the top of the order
Move a preset point up one position in the list
Move a preset point down one position in the list
Move a preset point to the bottom of the order
Track
This interface is used to program the tracking routine for the camera. Clicking on the Track
button will bring up the live view for that camera plus a control panel:
The user can control the dome's rotation direction, plus speed as well as the zoom, focus and
iris.
Start Record – The system will begin recording the sequence of movements you perform on
the PTZ control panel. Clicking this again will stop the recording.
Start Track – This will play back the tracking sequence you just recorded. Clicking on this
button again will stop the playback.
PICTURE 7-8
119