Qt7116 - QSee QT SERIES User Manual

QT7116

FRONT PANEL
1 2
ITEM NAME FUNCTION
1 Press and hold to begin the shutdown process. the hard
SHUT DOWN
drive(s) will spin down and the DVR will display a message
letting you know when it is safe to turn off the power using the
switch on the rear panel (Item #16 on the next page).
2 CHANNEL LED Shows the connection status of each camera.
INDICATORS
3 VIDEO For use in Video Playback mode. Allows fine adjustment of
PLAYBACK video playback speed.
KNOB
4 NUMBERS For selecting channels. Use the 0/10+ button for selecting
channels 10-16
5 LED Show status of power, hard drive, record, etc.
INDICATORS
6 INFO Opens the Information menu
7 IR RECEIVER Receives signals from remote control
8 ENTER Confirm selection
9 RECORD Begins manual recording on all channels
10 MENU Opens MAIN MENU
11 VIDEO For use in Video Playback mode. Pressing the magnifying
PLAYBACK glass icon enters the Video Search mode.
CONTROLS
12 AUDIO/+ Turns audio on or off. Increase the value in SETUP
13 PTZ/- Opens PTZ control menu. Decreases the value in SETUP
14 DIRECTION/ 1. Navigate through on-screen options
2. Change screen display mode between 1, 4, 9 and 16
MULTISCREEN
channels
15 USB USB port to connect USB flash or external hard drives to
update firmware or back up recordings
16 BACKUP Opens BACKUP window.
68
3 4 5 6 7 8
11 12 13 14 15
REAR PANEL
9 10
16
ITEM NAME
1 VIDEO IN
2 CVBS (Video
Out)
3 AUDIO
OUTPUT
4 MIC IN
5 AUDIO IN
6 ESATA
7 FAN
8 DC +12V
9 ALARM IN
10 HDMI
11
VGA PORT
12 ALARM OUT
13 LAN
14 USB PORT
15 PTZ RS485
BLOCK
16 POWER
SWITCH
1 2 3 4
9 10 11 12 13
FUNCTION
Video input from up to 16 HD SDI cameras
Video output for connecting to TV (BNC) or monitor
Connection for audio output – connect to an amplified speaker
RCA connection for using microphone. Requires speaker(s)
located with camera(s).
16 channel audio input for cameras equipped with audio. Dongle
is located in accessory box.
Ports for connecting two external SATA hard drives for backup.
Cooling fan exhaust port. This should not be blocked.
Power input
Input ports for 16 alarms.
HDMI video output
Video output for connecting to monitor at least 19" in size
Four output ports for external alarms
Network (ethernet) port
Connect USB mouse
Connections for Pan-Tilt-Zoom speed dome cameras. Y = "+" Z
= "-"
Use to turn on the DVR as well as to turn off after powering
down from within the GUI
5 6 7 8
14 15 16
69